Samsung refrigerator rs2530bsh manual

Page 4: Precautions Safety Warnings 1. Avoid electric shock. Check that they have the correct model number, rated voltage, rated current, operating temperature and so on. Page 7: Product Specifications 2. This provides even distribution of cooling inside cabinets to keep your food fresh longer. Ft Net Capacity Fridge Ft Freezer 9. Page 16 3. Connect water lines and power cord. Page 26 4. To avoid this, if power is applied, it judges the temp of Freezer and operates as either initialization or restoration of operation conditions.

Press for 12 seconds 1 For example, if you want to shift the Refrigerator standard temp by So, those options are skipped.

Do not change any other options except the above options. Page 35 5. Lift the handle upward motion with on. Be careful not to scratch. Use a small flat-blade screwdriver to unlock the locking tab and pull the switch out until the wire Door Light connector is visible. The drawers are located in the lower portion Plastic Drawers of the refrigerator. Pull out the Twin cool by unlocking the hooks. Twin cool Be careful of injury. The drawers are located in the lower portion of the freezer.

Plastic Drawer 1. Pull out the drawer as far as it goes. In Freezer 2. Disconnect the ice maker wire connector. The light is covered by an opaque cover. Remove the screw and the light cover. Freezer Light When diassembling,make sure the unit turned off. This fan circulates cold air in the refrigerator. Evaporator Fan 1. Remove the fan spring, and than remove fan and Motor protector motor.

Disconnect the power cord of the refrigerator. Remove the fixed screws 7 of compressor cover. Slide up and take off the compressor cover to see the machine compartment. It cools down the subcondenser and the compressor. Lift up the rib under the support motor. Page Trouble Shooting 6. Check if power is supplied at Concent and Power Cord is connected properly before repair 2.

Check by referring to the followings. Check assembly of wires and do repairing Is Power of secondary Check soldering fault,short, Change Temp pick-up part, Concerned Sensor When Door remains open after this, the alarm goes off every minute. Replace or troubleshoot By now, the refrigerator most likely would have rebalanced and recalibrated itself.

Plug it into the power socket and turn it on. To reset your Samsung refrigerator and get it out of shop mode, press the power freezer and power cool buttons simultaneously, holding it for a while — for about 2 to 5 seconds.

Thereafter, release the buttons. The refrigerator would have been reset and the cooling function will resume. To reset your Samsung refrigerator and get it out of demo mode, press the Energy Saver and Freezer buttons at the same time, and hold them for about 10 seconds. Do keep in mind that this method works only for Samsung refrigerators from and older.

For newer Samsung refrigerators, you will need to press Freezer, Energy Save, and Lighting simultaneously. In some cases you will need to press Freezer, Energy Save, and Fridge and hold them simultaneously for about 10 seconds.

To reset your Samsung refrigerator control panel, simply press the Power Cool and Power Freeze buttons at the same time, and hold for about 10 seconds until you see the numbers on the display reset. But what if your control panel is not displaying or the buttons are not working at all?

Carry out a general reset by following the steps above. To deactivate the child lock feature on your Samsung refrigerator, simply press and hold the child lock button for a few seconds.

In the absence of one depending on the model , follow the steps provided for your model in the product manual. To reset your control panel display, locate the reset switch at the top of the right door interior side and switch it off and then on again. The unit will reboot and the Samsung logo will appear on the panel.

Need expert help? Use the chat box on this page to speak with a verified appliance technician right away. No need for expensive in-home service calls. No appointments. No waiting. At times, the display might blink an error code indicating that there is a communication problem between the refrigerator door and the main control unit.

If it is, simply reconnect. If it is in place, still disconnect it and then reconnect it back. Then plug it in and switch on the refrigerator.

It would have removed the error code. To reset a Samsung fridge touch screen, find a red switch on top of the fridge This red switch is behind a small panel on the right door. The panel has Push written on it. Flip the red switch and then flip it back to its original position again.

Your touch screen should start working now. Do you own a different brand of refrigerator that needs resetting? Check out these articles…. Go to the control panel or touch screen display Some Samsung refrigerator models have theirs inside the fridge while others have their displays outside.

Press the fridge button to display the current temperature The temperature ranges from 34 to 44 degrees Fahrenheit. Keep pressing the fridge button until you get to your desired temperature. Assuming you want to increase the temperature to 37 degrees and it is currently at 35 degrees, tapping the button once will take the temperature to 34 degrees which happens to be the lowest temperature for the fridge.

You can then press the button again to take it to 43 and so on until it gets to Important note: The temperature setting does NOT have up or down buttons but goes in circles from 44 degrees down to 34 degrees and back to 44 degrees. Step 1: Locate the control panel Depending on the model of Samsung refrigerator you own, it could either be inside the fridge or outside. Step 2: Press the freezer button until you get to your desired temperature.

Note that on some freezers, you will have to hold it for about 5 seconds so it stays on the temperature you set it on. Also note that the freezer temperature circles from -8 degrees to -7, -6, -5 and so on until you get to 5 degrees and back again.

For video demonstration of how to reset the temperature of the freezer of a Samsung refrigerator, watch the video below…. To reset your Samsung fridge after a power outage, press the power save and lighting buttons for 10 seconds or press the fridge and freezer buttons at the same time for 10 seconds.

Holding the fridge and freezer buttons at the same time will reset the refrigerator and remove these error codes. However, you should try the power save and lighting buttons option first before resetting your refrigerator. Pull out the ice tray.

Locate the reset button. Look to the side. You should see the blue reset button there.